English
Input selection and
AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.
Alternatively press the external source selection button Buntil the picture from connected equipment is shown.
This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT3C).
An S in the display e.g. B2S (EXT 2S), indicates the input is set for an
Input selection
Use the Input Selection if the television does not switch
over automatically.
1Press Bto select B1, B2, B3(C) (EXT1-3), HDMI1, HDMI2 or PC.
HDMI™ displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with 1080i high definition signals.
PC displays a computer connected to Input RGB/PC on the back of the television.
2To return to television mode press Bagain or one of the numbered buttons.
INPUT signal selection
This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
1In the SET UP menu press down until
AV connection is highlighted, then press OK.
|
|
|
|
|
| SET UP | 1/2 | ||
Language |
|
| English |
|
Country |
|
| UK |
|
Auto tuning |
|
| OK | |
Manual tuning |
|
| OK | |
AV connection |
|
| OK | |
|
|
|
|
|
Picture position |
|
| OK | |
|
|
|
|
|
MENU Back | EXIT Watch TV |
|
| |
2With left or right select either AV or
| AV connection |
PC/HDMI1 audio | PC |
HDMI1 audio | Digital |
EXT2 input | |
Monitor (Audio) | Fixed |
MENU Back | EXIT Watch TV |
If the colour is missing try the alternative setting.
22
