SRS Labs WL66 owner manual Connecting external equipment, Aerial cables, Scart leads

English

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

SCART 2 (EXT2)	COMPONENT
	VIDEO (EXT3)
SCART 1 (EXT1)	CABLE HOLDER

☛	*			could
	a decoder
be Digital		Satellite
or any other				.
compatible			decoder

FIXING STRAP

decoder*

media recorder

Aerial cables:

MEDIA REC.

TV

IN/OUT SAT

HDMI™ INPUT SOCKETS

HDMI™ (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment with digital

Connect the aerial to the socket on the rear of the television. If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads:

Connect the video recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.

Before running Auto tuning put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

In addition there is a fixed/variable external audio ouput which enables the connection to a suitable Hi-Fi unit, make sure the Speaker option in the Sound menu is set of Off. The variable option is altered by using the sound controls.

audio and video output. It is designed for best performance with 1080i high-definition video signals but will also accept and display 480i, 480p, 576i, 576p and 720p signals.

A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 for a media recorder.

If connecting S-VIDEO equipment, set the INPUT for EXT2. See page 22.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press Bto select between EXT1, EXT2, EXT3 (C), HDMI1, HDMI2 or PC.

The cable holder can be used for aerial, media recorder and audio cables. Do not use the cable holder as a handle and make sure all cables are removed before moving the television.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

6