12 Setup
2.4 Connecting up your digital receiver
Thereare several ways to set up the digital receiver. Set up the
digitalreceiver suitably to your television and other appliances.
Ifyou have any problem with your setup or need help, contact
yourdealer.

2.4.1 Connectingthe antenna

Whatever sort of connection you have be-
tweenthe digital receiver and the television,
you need to connect the digital receiver to
yourtelevision antenna so that it can receive
digitaltelevision services.
Connect the antenna cable to the LNB 1 IN
connector on the back panel of the digital
receiver.
Also, you must ensure that there is a con-
nection to both the LNB 1 IN andLNB 2 IN
connectors on your digital receiver,so that
bothtuners work properly.
Normally you do that by using a loop cable to link fromthe
LNB1 OUT connector to the LNB 2 IN connector.
If you have two antennas without DiSEqC switch, then you
haveto connect a cable from the other antenna directly to the
LNB 2 INconnector rather than using the loop cable. Ifyou
haveanother digital receiver, you may link it from the LNB 2
OUTconnector.
NOTE
Thedigital receiver can supply a current of 500 milliampere at
maximumfor antenna devices including LNB, DiSEqc switch
andantenna rotor through each antenna input connection sep-
aratelybut not simultaneously. If there are too many antenna