78 FirmwareUpdate
withother letters, the digital receiver cannot recognize not only
itbut also its subsequent files and folders.
8.3 From the firmware server via the Internet
Youcan update the firmware from the firmware server which
isrun by Topfield via the Internet. Make sure that the digital
receiver is connected to your router before configuring the
networksettings on the digital receiver.
NOTE
Fordetailed description about how to set up the router, refer
tothe manual of your router.
Selectthe Installation
>
LANSet-
ting
>
IP Configuration menu.
Youshould see a screen like the
leftfigure.
Youmay get the digital receiver
tobe assigned a dynamic IP ad-
dress. Set the DHCP option to
Onto do that.
Ifyou desire to use static IP address, set the DHCP option to
Off;then the IP Address,Subnet Maskand Gateway options
becomeenabled. Youhave to set these options to match with
theconfiguration of your router.
Toenable the digital receiver to update the firmware automat-
ically when a new firmware is available, set the Auto LAN
Firmware Upgradeoption to On.
Otherwiseif you to do that by yourself, select the Installation
>
LAN Firmware Upgrademenu; then you get asked for confir-
mation. If you select Yes,it checks up whether a new firmware
isavailable, and if any, it will start firmware update.