20 PreferenceSettings
3.2 Videoand audio settings
Youhave to configure the video
andaudio settings appropriately
to your television set and other
appliances.
Select the System Setting
>
A/V Output Setting menu. You
should see a screenlike the left
figure.

3.2.1 Colour model

Throughthe TV SCART connector, the digital receiver is able
to output video in various colour models. Ifyou have the
digitalreceiver linked to your television via this connector, you
should set the SCART Output option to your desired colour
model. Ifyouhave connected via the RCA connector labeled
VIDEOon the back panel, you do not have to set this option
becausethe digital receiver outputs CVBS video through the
RCAconnector independent of the SCART connector.
However,if you have connected via the S-VIDEO connector,
you have to set this option to S-Video because the output
throughS-Video connector comes from the SCART interface.
Similarly,if you have done by YUV connectors (Y,Pb and Pr),
youhave to set this option to YUV for the same reason.
Itis known in general that the RGB colour model provides the
bestvideo quality with little difference from the YUV colour
model but the CVBS colour model does the least. SoRGB
wouldbe most desirable for this option.