8.2From a USB memory 77
NOTE
Itis only allowed to update with the firmware of which system
identificationis identical to that of yours. Otherwiseyou will
failin firmware update.
8.2 From a USB memory
Ifyou have a USB memory stick, you can update the firmware
fromit by performing the following steps:
1.
Download a new firmware from the Top-
fieldweb site.
2.
Copythe firmware file to your USB memory
stick.
3.
Insertthe USB memory stick into the USB
porton the back panel of the digital receiver.
4.
Selectthe Installation
>
USBFir mware Up-
grademenu, then the files in the USB mem-
oryare listed.
5.
Place the highlight bar on the right
firmwarefile and press the
OK
button,then
acountdown will be displayed on the front
displayof the digital receiver.
6.
When the ‘END’ message appears, restart
thedigital receiver.
NOTE
YourUSB memory must be formatted in the FAT file system.
Otherwise, the digital receiver cannot recognize your USB
memory. In addition, the digital receiver can only recognize
filesand directories which are named with only alphabetic, nu-
mericand underscore letters. Ifthere is a file or forlder named