Installation Overview
4 important parameters to create a wireless network
A wireless network can be created using the 4 parameters below which are programmed in the
*Node: A device that is connected to the network and can communicate with other network devices. In this Operating Instructions, we use this word for the Broadband Networking Gateway or a computer.
Network Name
Name for a wireless network. For security, only the nodes that are programmed with the same Network Name can communicate. It is necessary to set a Network Name for all the
Network ID
The ID that is created from the Network Name. Actually, this ID is used for maintaining a wireless network instead of the Network Name. However, users do not need to care what Network ID is programmed to each node.
Node Name
Name of each node in your network (wireless or wired) for identification. The Node Name of the Broadband Networking Gateway is set on its administration web screen. The Node Name of a computer is set in the Identification tab in the Network dialog box which can be accessed via the Control Panel menu on your computer.
Channel Number
Number of the radio frequency channel on which a wireless network communicates. To prevent the radio frequency interference with other wireless products, the channels below can be selected depending on the status of the wireless communications:
Channel 1 (2412 MHz)
Channel 6 (2437
On each channel,
10
