Panasonic KX-HGC200 operating instructions Overview, Features, System requirements

Overview

Features

No wiring

The KX-HGC200 helps you network without troublesome wiring using wireless technology and accommodates up to 10 wireless users*.

*Accommodates up to 9 wireless users when used with the Broadband Networking Gateway.

High data-transmission quality by using the Whitecap™ protocol

The features of the Whitecap™ protocol are as follows:

³Error correction and dynamic TDMA (Time Division Multiple Access) for higher usable network throughput and range

³Carries several multimedia (video, voice, audio) data streams simultaneously

Internet sharing and expandability of the home network (With the Panasonic Broadband Networking Gateway)

When operated with the Panasonic Broadband Networking Gateway (In the following pages, Broadband Networking Gateway), the KX-HGC200 allows you to share an Internet connection with the other computers in your home network at the same time and expand your home network by using the HomePNA phoneline and Ethernet interfaces of the Broadband Networking Gateway.

Easy to configure/administrate

The KX-HGC200 setup wizard and Network Manager software lead you through an easy installation and administration.

System requirements

Operating System	Microsoft® Windows® 95 operating system
	(OSR2.0 or later)
	Microsoft® Windows® 98 operating system
	Microsoft® Windows® Me operating system
Interface	PCMCIA Type II PC card slot equipped
RAM	32MB or more
Other (for installation)	CD-ROM drive/Ethernet or HomePNA card
Protocol	TCP/IP installed
CPU	Pentium 133 MHz or faster

³The Network Management web screen (p. 20–21, 55–58) can be viewed using Internet Explorer 4.0 or later.

6