Panasonic KX-HGC200 operating instructions 1, 2

23
For assistance, please call: 1-800-272-7033
Installation
“
Helpful functions
For checking the setup parameters or data-transmission status of the
KX-HGC200, helpful functions are available on the Broadband Networking
Gateway administration web screen.
Checking the setup parameters
1Click [Status] on the Broadband Networking Gateway administration web screen.
2Check the Wireless section.
Firmware
Version
Network ID
(p. 10)
Master Node IP
Address (p. 73)
Wireless Card
State
Current version of the firmware, written in
the KX-HGC200 Flash-ROM. To update
the firmware, see p. 65.
The Network ID of the wireless network.
This ID works in order to identify a
wireless network to prevent an invalid
access to the wireless network.
The local IP address of the Master Node
in the wireless network.
connected to network:
The KX-HGC200 is connected to a
wireless network and working properly.
not connected to network:
The KX-HGC200 is not connected to any
wireless network.
TROUBLE:
The KX-HGC200 is not working properly.
The hardware or software is defected.