ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
STEP 1
Make the WHEEL(62) on the FRONT STABILIZER(2) face the front, then attach the FRONT STABILIZER(2) to the FRONT FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x53mm)(72), LOCK WASHERS(M8)(100), and WASHERS(M8)(103).
STEP 2
Slide the FOOT CAPS(63) onto both ends of the FRONT STABILIZER(2) so they fit over the edges of the LEFT and RIGHT COVERS(33, 34) and secure with ROUND HEAD SCREWS(M4x0.7x15mm)(85). Screw the FOOT STANDS(64) all the way up into the FRONT STABILIZER(2) on both sides.
7
