SET UP INSTRUCTIONS
Place the INSTRIDE
PLUS stepper in the area where it will be used. It is recommended that the INSTRIDE PLUS stepper be placed on an equipment mat. The max. operation dimensions of INSTRIDE PLUS stepper is approximately 17 3/8" long x 11 3/4" tall x 12 3/8" wide. (These dimensions may vary up to one inch.) An area 6 feet wide x 6 feet long is required for safe operation of the INSTRIDE PLUS stepper. Make sure that adequate space is available for access to and passage around the INSTRIDE
PLUS stepper.
LEVELING: Make sure the INSTRIDE
PLUS stepper is set solidly on the floor with no rocking. MOVING: Grasp the Front and Rear Stabilizers to move the INSTRIDE PLUS stepper. Do not use the
Pedal Arms to move the INSTRIDE PLUS stepper. The Pedal Arms will move and the SHOCK(6) may pinch your hand or fingers.
FUNCTION INSPECTION
NOTE: Always make sure that the CABLE(9) is properly seated in the groove on the PULLEY(8) before using the INSTRIDE PLUS stepper.
Visually inspect the INSTRIDE
PLUS stepper to verify that assembly is as shown in the above illustrations. Check the function of the INSTRIDE PLUS stepper. Stand on the foot pedals and slowly move your highest foot downward and follow the natural path of the machine. The Shocks provide resistance for your workout.
STORAGE
1. | To store the INSTRIDE PLUS stepper simply keep it in a clean dry place. |
2. | The minimum dimensions of INSTRIDE PLUS stepper is approximately 17 3/8" long x 8 1/4" tall x 12 3/ |
| 8" wide. These dimensions will vary. Please measure your INSTRIDE PLUS stepper if exact dimensions |
3. | are needed. |
Grasp the Front and Rear Frame to move the INSTRIDE PLUS stepper. Do not use the Pedal Arms to | |
4. | move the INSTRIDE PLUS stepper. |
To avoid damage to the electronics, remove the battery before storing the INSTRIDE PLUS stepper for | |
| one year or more. |
MAINTENANCE
The safety and integrity designed into the INSTRIDE PLUS stepper can only be maintained when the INSTRIDE PLUS stepper is regularly examined for damage and wear. Special attention should be given to the following:
1.Inspect the RESISTANCE TUBES(32) for nicks and cuts. Replace damaged RESISTANCE TUBES (32).
2.Verify that the SHOCKS(6) provide resistance by pushing down on the foot pedals.
3.SHOCKS(6) on steppers get HOT during use. To avoid burns, do not touch the SHOCKS(6) until they have time to cool.
4.Verify that the Warning Label is present and legible. Replace the Warning Label if it is missing or damaged.
5.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. | Worn or damaged components shall be replaced immediately or the INSTRIDE PLUS stepper removed |
7. | from service until repair is made. |
Only Stamina Products supplied components shall be used to maintain/repair the INSTRIDE PLUS | |
8. | stepper. |
Keep your INSTRIDE PLUS stepper clean by wiping with an absorbent cloth after use. |
7
