USING THE ELECTRONIC METER
POWER ON : Pedal movement or push any button.
POWER OFF : Automatic shut off after 4 minutes of inactivity.
FUNCTION BUTTONS:
MODE : Push to select the function of the lower readout.
RESET : To reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with change every 6 seconds.
COUNT : Upper readout displays the total number of strides you have taken, from zero to 9999 strides.
TIME: Displays the riding time, from 1 sec up to 99:59 minutes.
STRIDES/MIN: Displays the rate of strides per minute.
CALORIE: Displays the calorie consumption, from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.
AA Battery
How to Install and Replace Battery:
1. Open the Battery Door on the back of the meter.
2. The meter operates with an AA battery. Refer to the illustration to install or replace the battery.
Note:
1. Rechargeable batteries are not recommended.
8
