OPERATIONAL INSTRUCTIONS
SEAT ADJUSTMENT
Proper seat adjustment is important. There are seven adjustment holes in the REAR FRAME(3). These adjustment holes allow users to adjust the position of the seat for efficient exercise.
1.Rotate the ADJUSTMENT KNOB(45) counterclockwise until the knob portion can be pulled. Pull the ADJUSTMENT KNOB(45) and slide the REAR FRAME(3) backward. Lock the REAR FRAME(3) in position by inserting the pin of the ADJUSTMENT KNOB(45) into one of the adjustment holes in the REAR FRAME(3), then rotate the ADJUSTMENT KNOB(45) clockwise to lock the REAR FRAME(3) securely.
2.Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from the pedals if you have to completely straighten your knees at the bottom of the pedal stroke.
CAUTION:
1.Do not attempt to adjust the seat while you are on the Magnetic Recumbent 4825 Bike.
2.Always tighten the ADJUSTMENT KNOB(45) after adjusting the seat to a new position.
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(25) clockwise. To decrease the load, turn the TENSION KNOB(25) counterclockwise. There are eight levels for the load adjustment.
11
