STORAGE
FOLDING THE INVERSION TABLE
The INVERSION TABLE can be easily folded for storage.
To fold the INVERSION TABLE loosen the LOCKING KNOB(17) and pull out the LARGE SPRING PIN(16). Now, slide the HEIGHT ADJUSTMENT BEAM(6) all the way up into the MAIN FRAME(4) until the ADJUSTABLE INSTEP FRAME(7) is just below the MAIN FRAME(4), release the LARGE SPRING PIN(16) and slide the HEIGHT ADJUSTMENT BEAM(6) slightly up or down until the spring pin locks the beam in place. Remove the MAIN FRAME ASSEMBLY from the BASE by lifting up on the MAIN FRAME(4) until the PIVOT ARMS(5) come out of the slots located at the top of the REAR FRAME(2), (Make sure the NYLON STRAP is not attached to the MAIN FRAME(4) before attempting to remove it.) Push up on the center of the FOLDING LINKAGES(3) and push the FRONT FRAME(1) and REAR FRAME(2) together until they meet.
MAINTENANCE
The safety level of the INVERSION TABLE can be maintained only if it is examined regularly for damage and wear.
1.Check the warning label, nylon strap, strap buckle, pivot arms, nylon bed, Foam Pads, heel holders, small spring pin and large spring pin for damage and wear.
2.Replace damaged and worn components immediately and/or keep the equipment out of use until repairs are completed.
14
