Stamina Products 55-1527B, 55-1527C owner manual Assembly Instructions, Step

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.

STEP 1

Unfold the BASE ASSEMBLY to an upright position by moving the FRONT FRAME(1) away from the REAR FRAME(2). Then push down on the middle of the two FOLDING LINKAGES(3) until they are fully locked down.

STEP 2

Slide one PROTECTIVE COVER(21) onto each side of the BASE ASSEMBLY, and pull the covers down until the bottom of the covers are slightly lower than the FOLDING LINKAGES(3). Secure the PROTECTIVE COVERS(21) to the FOLDING LINKAGES(3) with the SECURING STRAPS on the bottom of the covers. NOTE: When the PROTECTIVE COVERS(21) are assembled correctly, the FOLDING LINKAGES(3)

should not be visible. Refer to the illustration.

7