ASSEMBLY INSTRUCTIONS
NOTE: Be careful not to damage the PULSE SENSOR WIRES(104) while doing assembly Step 8 and Step 9.
STEP 7
Attach the SEAT FRAME(6) onto the SEAT SUPPORT TUBE(5) with NYLOCK NUTS(M8x1.25)(80).
STEP 8
Attach the HANDRAIL(7) onto the SEAT FRAME(6) with CARRIAGE BOLTS(M8x1.25x50mm)(99) and NYLOCK NUTS(M8x1.25)(80). Run the PULSE SENSOR WIRES(104) through the upright of the SEAT FRAME(6) and plug it into the socket on the REAR FRAME(2).
STEP 9
Attach the SEAT(36) to the SEAT FRAME(6) with HEX BOLTS(M8x1.25x15mm)(97). Attach the BACK CUSHION(35) to the SEAT FRAME(6) with HEX BOLTS(M8x1.25x40mm)(96).
8
