![](/images/new-backgrounds/1182674/18267411x1.webp)
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
FRONT |
REAR |
STEP 1
Attach the FOOT PLATE(4) to the BASE FRAME(1) with the SHAFT(42) and BUTTON HEAD BOLTS (M6x1x10mm)(64).
STEP 2
Refer to the illustration. Bolt the BASE FRAME(1), REAR STABILIZER(2), and REAR SUPPORT(3) together with HEX BOLTS(M12x1.75x110mm)(76), ARC WASHERS(M12)(78), and NYLOCK NUTS(M12x1.75)(82). Do not tighten the bolts until STEP 3.
6