ASSEMBLY INSTRUCTIONS
FRONT |
REAR |
STEP 3
Attach the LOWER UPRIGHT(6) to the BASE FRAME(1) with the SUPPORT BRACKET(5), HEX BOLTS (M12x1.75x70mm)(72), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). Do not tighten the bolts. Attach the LOW UPRIGHT(6) to the REAR STABILIZER(2) with HEX BOLTS(M12x1.75x70mm)(72), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). Tighten all bolts, including the bolts for STEP 2.
STEP 4
Attach the LEVER ARM(8) to the LOWER UPRIGHT(6) with HEX BOLT(M12x1.75x80mm)(73), WASHERS (M12)(80), and NYLOCK NUT(M12x1.75)(82). Do not over tighten the bolt, as the LEVER ARM(8) must be able to pivot smoothly.
STEP 5
Slide the WEIGHT COLLARS(84) onto both sides of the LEVER ARM(8) and lock in position with the
LOCKING KNOBS(85).
7
