5.18 SETUP MODE
The HX370S’s Setup Mode allows a number of the HX370S operating pa- rameters to be
The Setup Mode is easy to activate and set, using the following procedure:
1.Turn the radio off.
2.Hold down the SQL key, then turn on the transceiver while still holding down the SQL key.
3.“SEt” will appear on the display, indicating that the Setup Mode has been activated.
4.Press the SQL key to select the Menu item to be adjusted (see below).
5.Press the [] or [] key select the status or value of the Menu item.
6.After completing your adjustment, press the SQL key to save the new setting, and then press the PTT switch to exit to normal operation.
Voice Scrambler
Scan Display
Scan Lamp
“SQL” Key
Key Beep
Channel Frequency
Channel Name
Lamp Mode | DW Display | |
|
|
|
HX370S |
| Page 27 |
|