Page 13Phantom PS1000
8.5 CONNECTION OF GPS WITH NMEA OUTPUT

• The GPS must have the NMEA Output turned on and set to 4800 Baud in

the setup menu. If there is a selection for parity select none.

• For further information on interfacing /setting up your GPS. Please contact

the manufacturer of the GPS receiver.

•Phantom PS1000 can read NMEA-0183 version 2.0 or higher.

• The NMEA supported sentences are:

Input: GLL, GGA, RMC and GNS (RMC sentence is recommended)

Output:DSC and DSE

(DSC sentences to Standard Horizon Plotter for Position Polling)

If you have further inquires, please feel free to contact Product Support at:

Phone: (800) 767-2450

Email: marinetech@vxstdusa.com

8.6 CHECKING GPS CONNECTIONS

After battery, GPS and the RAM+ microphone(s) have been connected, press

the power switch on the Phantom PS1000 and press and hold the power key

on a RAM+ mic, a small satellite icon will apper on the top right

corner of the LCD display. To see additional GPS information,

press the [NAV] key momentarily. The Phantom PS1000 shows

“time,” “latitude,” and “Longitude” alternately every two seconds.

To hide the navigation information, press the [NAV] key again.

Manufacturer/Model
Lowrance Portable
Magellan Fixed Mount
Magellan Portable
Northstar
Raytheon 420
Raytheon 520 / 620
Raytheon RL SERIES
Simrad
Sitex Neptune, Nautilus
Wires
Orange
Black (GND)
Gray
Black (GND)
Orange
Black (GND)
Yellow
Black (GND)
Yellow
Brown
Blue
Brown
White
Brown
White
Brown
Gray
Brown
PS1000
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Wires
Green
Blue
Brown
White
Blue
White
Black
Blue
Black (GND)
Brown
Black (GND)
Yellow
Green
Green
Black
White
Black
White
Black (GND)
Manufacturer/Model
STANDARD HORIZON
Furuno GP30, 36
Furuno GP1650, 1850
Garmin Fixed Mounts
Garmin Portables
JRC GPS500
JRC 100 SERIES
JRC 200 SERIES
Lowrance Fixed Mount
PS1000
Green
Gray
Blue
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green