Tip: Windows shortcut for Unplug/Eject and Stop Hardware steps: Left-click on the "Unplug and Eject Hardware" icon found in the system tray. A menu appears. Select the appropriate selection for your operating system (see step 5) and click OK when the Safe to Remove Hardware window appears.

Installation Procedures

4.Select the following menu selection from the ʺUnplug or Eject Hardwareʺ window for your operating system and click Stop to proceed:

·Windows 98 SE and Me ONLY: Select ʺWireless PC Card USB Open Host Controllerʺ

·Windows 2000 ONLY: Select “Standard OpenHCD USB Host Controller”

·Windows XP ONLY: Select “Lucent USB OpenHost Controller”

5.Select the appropriate menu selection for your operating system from the "Stop a Hardware Device" window. (Refer to step 4)

6.Once the “Safe to Remove Hardware” message appears, click

OK.

7.You may now remove the AirCard 580 from your notebook. Use the ejector button on your notebook to eject the AirCard 580 from the slot. Do not pull the AirCard 580 out by the antenna.

Figure 3-5: Proper PC card insertion and removal

Driver installation

driver:

A driver is software that provides the interface between a device (such as the AirCard 580) and the operating system on your PC (such as Windows Me).

1.Once the card is properly inserted, your Windows operating system will notify you that new hardware has been detected. Please review the following notes :

 

 

 

 

 

 

 

v2.1 May.04

 

 

 

 

 

13