TABLE OF CONTENTS |
|
CERTIFICATE OF CONFORMITY | 2 |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS & TAGS | 7 |
HYDRAULIC HOSE TYPES | 8 |
HOSE RECOMMENDATIONS | 9 |
HTMA / EHTMA REQUIREMENTS | 10 |
OPERATION | 11 |
PREOPERATION PROCEDURES | 11 |
CONNECT HOSES | 11 |
TOOL OPERATION | 11 |
STARTUP | 11 |
GENERAL OPERATION | 12 |
WET CUTTING | 12 |
BROKEN | 12 |
SHUTDOWN | 12 |
PERIODIC MAINTENANCE | 13 |
THRUST COLLAR AND INSIDE/OUTSIDE COLLAR INSPECTION | 13 |
13 | |
BEARING CHECK | 13 |
CARE AND STORAGE | 13 |
CUTOFF WHEELS | 13 |
TOOL | 13 |
CUTOFF WHEEL REPLACEMENT | 14 |
COLD WEATHER OPERATION | 14 |
EQUIPMENT PROTECTION & CARE | 15 |
TROUBLESHOOTING | 16 |
SPECIFICATIONS | 17 |
ACCESSORIES | 17 |
CO25 PARTS ILLUSTRATION | 18 |
CO25 PARTS LIST | 19 |
IMPORTANT
To fill out a Product Warranty Validation form, and for information on your warranty,
visit Stanleyhydraulics.com and select the Company tab, Warranty.
(NOTE: The warranty Validation record must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
CO25 User Manual ◄ 3
