SAFETY PRECAUTIONS
Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.
These safety precautions are given for your safety. Review them carefully before operating the tool and before per- forming general maintenance or repairs.
Supervising personnel should develop additional precau-
tions relating to the specific work area and local safety
regulations. If so, place the added precautions in the space provided on the previous page.
The CO25 Hydraulic
•The operator must start in a work area without bystand- ers. Flying debris can cause serious injury.
•Do not operate the tool unless thoroughly trained or under the supervision of an instructor. Establish a training pro- gram for all operators to ensure safe operation.
•Always wear safety equipment such as goggles, ear, breathing and head protection, and safety shoes at all times when operating the tool. Use gloves and aprons when necessary.
•The operator must be familiar with all prohibited work areas such as excessive slopes and dangerous terrain conditions.
•Maintain proper footing and balance at all times. Alway hold the tool with both hands when the unit is running. Use a firm grip.
•Do not inspect or clean the tool while the hydraulic power source is connected. Accidental engagement of the tool can cause serious injury.
•Always connect hoses to the tool hose couplers before energizing the hydraulic power source. Be sure all hose connections are tight and are in good condition.
•Do not operate the tool at oil temperatures above 140°F/60°C. Operation at higher temperatures can cause higher than normal temperatures at the tool which can result in operator discomfort.
•Do not operate a damaged, improperly adjusted, or incompletely assembled tools.
•Never wear loose clothing that can get entangled in the working parts of the tool.
•Keep all parts of your body away from the rotating parts. Long hair or loose clothing can become drawn into rotating components.
•Always use accessories that conform to the specifica- tions given in this manual.
•Release the trigger if the power supply has been inter- rupted.
•When working near electrical conductors, always as- sume that all conductors are energized and that insula- tion, clothing and hoses can conduct electricity. Use hose labeled and certified as
•To avoid personal injury or equipment damage, all tool repair, maintenance and service must only be performed by authorized and properly trained personnel.
Warning: Use of this tool on certain materials during demolition could generate dust potentially containing a variety of hazardous substances such as asbestos, silica or lead. Inhalation of dust containing these or other hazardous substances could result in serious injury, cancer or death. Protect yourself and those around you. Research and understand the materials you are cut- ting. Follow correct safety procedures and comply with all applicable national, state or provisional health and safety regulations relating to them, including, if appropri- ate arranging for the safe disposal of the materials by a qualified person.
CO25 User Manual ◄ 5
