SAFETY PRECAUTIONS

Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.

These safety precautions are given for your safety. Review them carefully before operating the tool and before performing general maintenance or repairs.

Supervising personnel should develop additional precautions relating to the specific work area and local safety regulations. If so, place the added precautions in the space provided on page 5.

The EP30 Electronic Pin Brazing Units will provide safe and dependable

service if operated in accordance with the instructions given in this manual. Read and understand this manual and any stickers and tags attached to the tool before operation. Failure to do so could result in personal injury or equipment damage.

•Operator must start in a work area without bystanders. The operator must be familiar with all prohibited work areas such as excessive slopes, dangerous terrain conditions, and rail traffic.

•Establish a training program for all operators to ensure safe operation.

•Do not operate the tool unless thoroughly trained or under the supervision of an instructor.

•Always wear safety equipment such as goggles, ear, head protection, and safety shoes at all times when operating the tool.

•Do not inspect or clean the tool while the battery power source is connected. Accidental arcing can cause serious injury.

•Do not load brazing pins or ceramic rings while the battery power source is connected. Accidental arcing can cause serious injury.

•Do not use the tool while it is connected to a battery charger.

•Ensure battery charging is only done in a dry environment. Charging batteries in the rain or near standing water resents an electrocution hazard. Read the safety and operation instructions provided with the battery charger before using the battery charger.

•Do not operate a damaged, improperly adjusted, or incompletely assembled tools.

•To avoid personal injury or equipment damage, all tool repair, maintenance and service must only be performed by authorized and properly trained personnel.

•Do not exceed the rated limits of the tool or use the tool for applications beyond its design capacity.

•Always keep critical tool markings, such as labels and warning stickers legible.

•Always replace parts with replacement parts recommended by Stanley Hydraulic Tools.

6

Page 5 Page 7
Page 6
Image 6
Stanley Black & Decker EP30 user manual Safety Precautions
Page 5 Page 7

EP30 specifications

The Stanley Black & Decker EP30 is a cutting-edge power tool designed for professionals and DIY enthusiasts alike. Leveraging the extensive experience and reputation of Stanley Black & Decker in the power tools industry, the EP30 delivers outstanding performance and reliability. This innovative tool stands out with its robust design and advanced features, making it ideal for a wide range of applications.

One of the main features of the EP30 is its powerful motor, which ensures high torque and consistent performance. Whether you are drilling into wood, metal, or masonry, the EP30 provides the necessary power to tackle tough jobs with ease. The variable speed control allows users to adjust the speed according to their requirements, enhancing precision and control during operation.

The EP30 also incorporates cutting-edge battery technology, featuring a high-capacity lithium-ion battery that provides longer run times and quicker charging capabilities. This means less downtime and more productivity on the job site. Additionally, the battery management system ensures optimal performance, prolonging the lifespan of the battery through smart energy usage and temperature control.

Another noteworthy characteristic of the EP30 is its lightweight and ergonomic design. The tool is crafted for user comfort, allowing for prolonged use without causing fatigue. The rubberized grip enables a firm hold, enhancing maneuverability and control, while the compact design ensures easy access to tight spaces.

The EP30 is equipped with advanced safety features, including an electronic brake that stops the tool quickly for added safety. This feature is particularly useful in preventing accidents and ensuring that users can work with confidence. Additionally, the tool's durable construction and impact-resistant housing contribute to its overall robustness, making it suitable for the rigors of construction sites and other demanding environments.

In summary, the Stanley Black & Decker EP30 exemplifies the brand's commitment to innovation and quality. With its powerful motor, advanced battery technology, ergonomic design, and safety features, the EP30 is a versatile tool that meets the needs of both professionals and hobbyists. Whether you are working on a home improvement project or tackling industrial tasks, the EP30 is sure to deliver exceptional performance and reliability.
Top Page Image Contents