OPERATION

GENERAL PROTECTION

Store the Electronic Pin Brazing Unit in a place where it is protected from the elements, abrasive dust, and damage.

Use only recommended repair and replacement parts and materials specified in the Parts List section of this manual.

Use only recommended accessories also specified in the Parts List section of this manual.

Do not use the Electronic Pin Brazers for applications it was not designed for.

Use the carrying handle to transport the unit from location to location.

CLEANING

Establish a routine to keep the unit as free from dirt as pos- sible – daily, or at each shift change, for example.

Pin Brazers exposed to rain, sand, or grit-laden air should be cleaned prior to each use.

Keep tool labels and stickers legible.

PREOPERATION PROCEDURES

Before putting a new Pin Brazer into initial service, or after an extended period of being unused, perform a visual inspection for bent, broken, cracked, missing or worn components.

INITIAL SETUP AND BATTERY CHARGING

WARNING

Failure to follow the instructions in the battery charger operation manual can result in battery explosion and serious bodily injury. To reduce the risk of battery ex- plosion, read and understand the safety and operation instructions in the battery charger operation manual, the instructions published by the battery manufacturer, and the instructions in this manual before attempting to charge the batteries.

WARNING

Make sure battery charging is only accomplished in a well ventilated room. DO NOT PLACE THE CONTROL BOX ON TOP OF THE BATTERIES. REMOVE THE BATTERY BOX COVER. Battery charging produces explosive gases. A battery explosion can cause serious injuries. Avoid battery explosions by keeping cigarettes, sparks, and flames away from batteries being charged. Always wear safety glasses when working with batteries.

1.The three batteries furnished are sealed, maintenance free batteries.

Sealed, maintenance free batteries do not contain cell caps and are already filled with battery acid. They will require charging before use.

NOTICE

Use only battery charger specially made for pin brazing units (36V dc) approved by Stanley.

2.Locate the four battery cables and connect them to the terminals on the batteries and the battery box as shown in figure 1. Do not replace the lid on the battery box at this time.

+Pos.

-Neg.

Figure 1. Battery cable and terminals

3.Insert the enclosed foam-rubber spacers between each battery and at both ends between the battery and the unit.

4.Connect the battery charger to the grinder outlet on the unit, then to the mains. When removing the charger remove the main first, the remove the plug from the unit.

7

Page 6 Page 8
Page 7
Image 7
Stanley Black & Decker EP30 user manual Operation, Initial Setup and Battery Charging
Page 6 Page 8

EP30 specifications

The Stanley Black & Decker EP30 is a cutting-edge power tool designed for professionals and DIY enthusiasts alike. Leveraging the extensive experience and reputation of Stanley Black & Decker in the power tools industry, the EP30 delivers outstanding performance and reliability. This innovative tool stands out with its robust design and advanced features, making it ideal for a wide range of applications.

One of the main features of the EP30 is its powerful motor, which ensures high torque and consistent performance. Whether you are drilling into wood, metal, or masonry, the EP30 provides the necessary power to tackle tough jobs with ease. The variable speed control allows users to adjust the speed according to their requirements, enhancing precision and control during operation.

The EP30 also incorporates cutting-edge battery technology, featuring a high-capacity lithium-ion battery that provides longer run times and quicker charging capabilities. This means less downtime and more productivity on the job site. Additionally, the battery management system ensures optimal performance, prolonging the lifespan of the battery through smart energy usage and temperature control.

Another noteworthy characteristic of the EP30 is its lightweight and ergonomic design. The tool is crafted for user comfort, allowing for prolonged use without causing fatigue. The rubberized grip enables a firm hold, enhancing maneuverability and control, while the compact design ensures easy access to tight spaces.

The EP30 is equipped with advanced safety features, including an electronic brake that stops the tool quickly for added safety. This feature is particularly useful in preventing accidents and ensuring that users can work with confidence. Additionally, the tool's durable construction and impact-resistant housing contribute to its overall robustness, making it suitable for the rigors of construction sites and other demanding environments.

In summary, the Stanley Black & Decker EP30 exemplifies the brand's commitment to innovation and quality. With its powerful motor, advanced battery technology, ergonomic design, and safety features, the EP30 is a versatile tool that meets the needs of both professionals and hobbyists. Whether you are working on a home improvement project or tackling industrial tasks, the EP30 is sure to deliver exceptional performance and reliability.
Top Page Image Contents