OPERATION

5.Charging is ready in approximately 3-5 hours. Follow the instructions in the battery charger manual to complete the charging process.

6.Plug the two cable leads from the adapter box into the battery box.

7.Insert the plug from the battery charger into the grinder outlet on the adapter box.

8.Plug the battery charger into a standard 110 volt AC outlet.

9.Follow the instructions in the battery charger manual to complete the charging process.

CONNECTIONS

Grinder Receptacle Control Cable

Gun Power Supply

Pin Size Switch

Female Socket

Receptacle

 

 

1 A Fuse

Ground Receptacle

 

 

15 A Fuse

Figure 2. EP30 Connections

1.Connect the brazing gun, power and trigger cables to the unit.

2.Connect the ground cable .

3.Connect the grinder.

OPERATION

PREPARE THE RAIL SURFACE

Select the type and length of bonding cable to use for the bond and use it as a guide to determine where brazing points on the rail will be required.

Before brazing, the rail must be cleaned of rust, corrosion, paint, pits, or other contamination at the points where the braz- ing is going to be done and on an area close to the brazing for placement of the grounding cable. Cleaning is accomplished with a grinder to ensure clean, bare metal.

NOTE:

Use only grinding wheels furnished by Stanley. Other wheels have shown to leave residues which cause faulty brazing.

CAUTION

Always use eye protection when grinding and brazing.

1.Grind the surface of the rail where brazing is going to be done, until the surface shows shiny metal, free of rust, cor- rosion, pits, or other contamination. When grinding, use the edge of the grinding wheel - not the face of the wheel.

2.Grind the surface of the rail where the grounding cable will be placed to ensure a good ground. The grounding cable should be placed in close proximity to the brazing area.

PLACING THE GROUNDING CABLE

3.When finished grinding the rail for placement of the ground- ing cable, place the grounding cable on the cleaned surface and then insert the other end into the twist lock receptacle in the control box marked "GROUND" or "EARTHING" and twist to lock.

SELECT PINS AND RINGS

4.Select brazing pins and ceramic rings to match the speci- fications of the bonding cable you selected.

CHANGING PIN AND RING HOLDER

5.Check that the pin holder and ring holder on the gun are the correct sizes for the brazing pins and ceramic rings you selected. If the sizes are incorrect, the pin holder and ring holder can be changed as follows:

8

Page 7 Page 9
Page 8
Image 8
Stanley Black & Decker EP30 user manual Prepare the Rail Surface, Placing the Grounding Cable, Select Pins and Rings
Page 7 Page 9

EP30 specifications

The Stanley Black & Decker EP30 is a cutting-edge power tool designed for professionals and DIY enthusiasts alike. Leveraging the extensive experience and reputation of Stanley Black & Decker in the power tools industry, the EP30 delivers outstanding performance and reliability. This innovative tool stands out with its robust design and advanced features, making it ideal for a wide range of applications.

One of the main features of the EP30 is its powerful motor, which ensures high torque and consistent performance. Whether you are drilling into wood, metal, or masonry, the EP30 provides the necessary power to tackle tough jobs with ease. The variable speed control allows users to adjust the speed according to their requirements, enhancing precision and control during operation.

The EP30 also incorporates cutting-edge battery technology, featuring a high-capacity lithium-ion battery that provides longer run times and quicker charging capabilities. This means less downtime and more productivity on the job site. Additionally, the battery management system ensures optimal performance, prolonging the lifespan of the battery through smart energy usage and temperature control.

Another noteworthy characteristic of the EP30 is its lightweight and ergonomic design. The tool is crafted for user comfort, allowing for prolonged use without causing fatigue. The rubberized grip enables a firm hold, enhancing maneuverability and control, while the compact design ensures easy access to tight spaces.

The EP30 is equipped with advanced safety features, including an electronic brake that stops the tool quickly for added safety. This feature is particularly useful in preventing accidents and ensuring that users can work with confidence. Additionally, the tool's durable construction and impact-resistant housing contribute to its overall robustness, making it suitable for the rigors of construction sites and other demanding environments.

In summary, the Stanley Black & Decker EP30 exemplifies the brand's commitment to innovation and quality. With its powerful motor, advanced battery technology, ergonomic design, and safety features, the EP30 is a versatile tool that meets the needs of both professionals and hobbyists. Whether you are working on a home improvement project or tackling industrial tasks, the EP30 is sure to deliver exceptional performance and reliability.
Top Page Image Contents