OPERATION

PRE-OPERATION PROCEDURES

CHECK POWER SOURCE

1.Using a calibrated flowmeter and pressure gauge, check that the hydraulic power source develops a flow of 4–9 gpm/15–34 lpm at 950–2000 psi/65–140 bar.

2.Make certain that the hydraulic power source is equipped with a relief valve set to open at 2100–­ 2250 psi/145–155 bar.

3.Check that the hydraulic circuit matches the tool for open-center (OC) or closed-center (CC) operation.

CHECK THE TOOL

1.Make certain all tool accessories are correctly in- stalled. Failure to install tool accessories properly can result in damage to the tool or personal injury.

2.There should be no signs of leaks.

3.The tool should be clean and dry with all fittings and fasteners tight.

CONNECT HOSES

1.Wipe all hose couplers with a clean lint-free cloth before making connections.

2.Connect the hoses from the hydraulic power source to the tool fittings or quick disconnects. Connect the return hose first and disconnect it last to eliminate or reduce trapped pressure for easier quick-connect fitting attachment.

NOTE:

If uncoupled hoses are left in the sun, pressure­ in- crease within the hoses can make them difficult to connect. Whenever possible, connect the free ends of hoses together.

3.Observe the flow indicators stamped on the hose couplers to ensure that the flow is in the proper di- rection. The female coupler on the tool’s IN port is the inlet coupler. See illustration in back of this man- ual for tool port identification.

4.Squeeze the drill trigger momentarily. If the drill does not operate, the hoses might be reversed. Verify correct connection of the hoses before continuing.

DETERMINE TOOL MODEL

Open-center or Closed-center Models

Closed-center models have a closed-center decal on the bottom of the handle.

If you are in doubt about the type, test the tool by con- necting it to an open-center circuit with the trigger re- leased. If pressure rises more in the circuit with the trig-

10 ► HD01 User Manual

ger released than when the trigger is pulled, the tool is closed-center.

Open-center/Closed-center Selectable Models

The open-center/closed-center selectable model has a decal on the trigger strut to remind you of the knob posi- tions to select.

IMPORTANT

Failure to set this spool correctly can cause a

mismatch with the hydraulic circuit. This can result in rapid tool heating, seal failure, and poor tool performance.

NOTE:

All models have a knurled knob on the spool. This knob cannot be rotated on single-circuit type tools.

CONTROLS

FORWARD/REVERSE

Forward/Reverse rotation is selected by the lever on the left-hand side of the tool, as shown in Figure 2.

Figure 2. Operator Controls

A

 

 

B

 

 

Function Select - Hammer

 

 

Only, Drill Only or Combine

 

 

Hammer and Drill. Press mode

 

 

selector button (B) and turn the

 

 

mode selector (A).

 

C

 

 

FWD

C

C

REV

 

 

 

Open-Center/

Forward and Reverse

Closed-Center

Select

 

Select

Page 9 Page 11
Page 10
Image 10
Stanley Black & Decker HD01 user manual Operation, PRE-OPERATION Procedures, Controls
Page 9 Page 11

HD01 specifications

Stanley Black & Decker has long been a trusted name in the tools and home improvement industry, and the HD01 model is a testament to the company’s commitment to excellence and innovation. The HD01 is a high-performance power tool that caters to both professionals and DIY enthusiasts, offering a blend of user-friendly features and cutting-edge technologies.

One standout feature of the Stanley Black & Decker HD01 is its powerful motor, designed to deliver impressive torque and speed, making it suitable for a variety of applications, from drilling into tough materials to driving screws with precision. This motor enables the HD01 to work efficiently in both heavy-duty and lighter tasks, ensuring versatility for users.

The design of the HD01 ensures comfort and control. Its ergonomic grip allows for extended use without causing unnecessary strain on the user’s hands. Furthermore, the tool's lightweight construction makes it easy to handle, even in tight spaces or when working overhead. These features are pivotal in ensuring that users can work for longer periods without fatigue.

In terms of technology, the HD01 incorporates a brushless motor, which not only improves the tool's longevity but also enhances performance. Brushless motors are known for their efficiency, translating to longer run times and reduced maintenance. This is an advantage that professionals, in particular, will appreciate, as it minimizes downtime on job sites.

Another characteristic of the HD01 is its variable speed settings, allowing users to adapt the tool’s performance to match the specific requirements of the task at hand. This feature enhances precision and control, whether the need is for a slow, steady approach or a rapid, powerful output.

The HD01 also comes equipped with advanced battery technology that provides longer run times and faster charging capabilities, ensuring that users can stay productive throughout their projects. The inclusion of an LED work light further amplifies its user-friendliness, illuminating work areas in low-light conditions and enhancing overall visibility.

In summary, the Stanley Black & Decker HD01 is a powerful, versatile, and user-centric tool designed to meet the needs of a diverse range of users. Its blend of innovative technologies and practical features makes it an essential addition to any toolkit, whether in the hands of a seasoned professional or a budding DIYer. With the HD01, Stanley Black & Decker continues to uphold its legacy of quality and innovation in power tools.
Top Page Image Contents