LOCKOUT KIT OC/CC

DUAL SPOOL FEATURES FOR THE HD01 HAMMER DRILL

KIT P/N-73018

IMPORTANT

This tool is furnished with an on-off valve spool commonly referred to as a “dual spool” which permits adjustment so the tool may be operated on either an open-center hydraulic system or a closed-center hydraulic system. The dual spool is normally set to the open-center (OC) position at time of manufac- ture. The dual spool can also be disabled so that the tool may be set to open-center only operation or closed-center only operation. For more details, please refer to the following instructions.

SETTING THE TOOL FOR EITHER OPEN-CENTER OR CLOSED-CENTER

HYDRAULIC SYSTEM OPERATION

To change the tool to closed-center (CC) system operation, locate the knurled knob on the spool end. Note that the knob contains two set screws which are located directly opposite one another. Turn the knurled knob so that the set screws are on a horizontal or cross-wise line. To change the tool to open-center (OC) system operation, turn the knurled knob so that the set screws are on a vertical or up and down line. For more detailed information on making these adjustments, refer to the User Manual.

TO DISABLE DUAL SPOOL OPERATION AND CONVERT TO OPEN-CENTER

OR CLOSED-CENTER ONLY OPERATION

The on-off valve spool commonly referred to as a “dual spool” can be set to open-center or closed-center opera- tion and then locked in position. The lock disables the normal method for adjusting the dual spool so that the tool cannot be changed from one hydraulic system setting to another (OC to CC or CC to OC) without first removing the lock. The parts included in this kit are required to disable the dual spool operation and install the lock. If you do not wish to disable the dual spool operation, you may discard this kit. To install the kit, refer to the instructions below.

FOR OPEN-CENTER (OC) SYSTEM OPERATION ONLY:

1.Turn the knurled knob so that the two set screws are on a vertical or up and down line.

2.At the end of the valve spool opposite from the knob is an o-ring which retains two steel balls. Remove the o- ring and the two (2) steel balls.

3.Obtain the set screw from the kit and install it (use a small amount of Loctite) in the threaded hole located in the o-ring groove (the groove for the o-ring which you just removed). Tighten the set screw until snug and then back off 1/2 turn. Check to make sure the valve spool moves freely.

4.Replace the two steel balls and the o-ring.

FOR CLOSED-CENTER (CC) SYSTEM OPERATION ONLY:

1.Turn the knurled knob so that the two set screws are on a horizontal or cross wise line.

2.At the end of the valve spool opposite from the knob is an O-ring which retains two steel balls. Remove the O- ring and the two (2) steel balls.

3.Obtain the set screw from the kit and install it (use a small amount of Loctite) in the threaded hole located in the O-ring groove (the groove for the O-ring which you just removed). Tighten the set screw until snug and then back off 1/2 turn. Check to make sure the valve spool moves freely.

4.Replace the two steel balls and the O-ring.

14 ► HD01 User Manual

Page 13 Page 15
Page 14
Image 14
Stanley Black & Decker user manual Lockout KIT OC/CC, Dual Spool Features for the HD01 Hammer Drill
Page 13 Page 15

HD01 specifications

Stanley Black & Decker has long been a trusted name in the tools and home improvement industry, and the HD01 model is a testament to the company’s commitment to excellence and innovation. The HD01 is a high-performance power tool that caters to both professionals and DIY enthusiasts, offering a blend of user-friendly features and cutting-edge technologies.

One standout feature of the Stanley Black & Decker HD01 is its powerful motor, designed to deliver impressive torque and speed, making it suitable for a variety of applications, from drilling into tough materials to driving screws with precision. This motor enables the HD01 to work efficiently in both heavy-duty and lighter tasks, ensuring versatility for users.

The design of the HD01 ensures comfort and control. Its ergonomic grip allows for extended use without causing unnecessary strain on the user’s hands. Furthermore, the tool's lightweight construction makes it easy to handle, even in tight spaces or when working overhead. These features are pivotal in ensuring that users can work for longer periods without fatigue.

In terms of technology, the HD01 incorporates a brushless motor, which not only improves the tool's longevity but also enhances performance. Brushless motors are known for their efficiency, translating to longer run times and reduced maintenance. This is an advantage that professionals, in particular, will appreciate, as it minimizes downtime on job sites.

Another characteristic of the HD01 is its variable speed settings, allowing users to adapt the tool’s performance to match the specific requirements of the task at hand. This feature enhances precision and control, whether the need is for a slow, steady approach or a rapid, powerful output.

The HD01 also comes equipped with advanced battery technology that provides longer run times and faster charging capabilities, ensuring that users can stay productive throughout their projects. The inclusion of an LED work light further amplifies its user-friendliness, illuminating work areas in low-light conditions and enhancing overall visibility.

In summary, the Stanley Black & Decker HD01 is a powerful, versatile, and user-centric tool designed to meet the needs of a diverse range of users. Its blend of innovative technologies and practical features makes it an essential addition to any toolkit, whether in the hands of a seasoned professional or a budding DIYer. With the HD01, Stanley Black & Decker continues to uphold its legacy of quality and innovation in power tools.
Top Page Image Contents