Intercom Features
69
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
does not ring and the speakerphone is
automatically turned on. This allows you
to easily monitor a baby’s room, for
example, from different areas of the
house.
1{MENU} i {#}{2}{7}{3}
2{V}/{^}: Select the desired setting.
3{SAVE} i {OFF}
Note:
LAuto intercom cannot be used when:
– your handset is receiving a
transferred outside call.
all handsets are being paged by the
base unit.
Answering an intercom call using
auto intercom
1When you are paged by another
handset, speak into the
microphone.
LTo switch to the receiver, press
{s}.
2To end the intercom, press {OFF}.
Monitoring audio in a room
You can listen to the sound in a room
where another handset is located.
Important:
LBefore using this feature, set auto
intercom on the destination handset to
On (Ringer Off) to allow access
by other handsets.
1Call the destination handset (page
68).
LYou can listen to the audio.
2To mute your sound output, press
{MUTE} if necessary.
3Press {OFF} to stop monitoring.
Intercom features between the handset and base unit

Intercom calls

Intercom calls can be made between the
handset and base unit.
Note:
LIf you receive an outside call while
talking on the intercom, the interrupt
tone sounds. To answer the call, press
{TEL} or {IP}. To turn the interrupt
tone off, see page 51.
LWhen paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1{INTERCOM}
2To page the base unit, press {0}.
LTo stop paging, press {OFF}.
3When you finish talking, press
{OFF}.
1{INTERCOM}
2To page a specific handset, enter its
extension number ({1}{8}).
To page all handsets, press {0} or
wait for a few seconds.
LThe paged handset(s) beeps for 1
minute.
LTo stop paging, press
{INTERCOM}.
Available model:
BB-GT1540
Handset
Base unit
GT15xxC.book Page 69 Tuesday, July 24, 2007 7:17 PM