Programming
54
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
For the answering system (BB-GT1540)
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 l Depending on the condition of your network connection, Toll saver
may not be used for the IP line.
Adjusting the handset ringer tone N
You can change the ringer tone heard when an outside call is received for each line.
You can also assign the ringtone you have imported (page 72). The default setting for
the IP line is Tone 2 and for the TEL line is Tone 1.
1{MENU} i {#}{1}{6}{1}
2{V}/{^}: Select the desired line.
3{V}/{^}: Select the desired setting.
4{SAVE} i {OFF}
Note:
Lk If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you
select a melody, you cannot distinguish lines by their ringers.
Feature Feature code Setting code Page
Call screening*1 {3}{1}{0}{1}: <On> {0}: Off 65
Recording
time*1
IP {3}{0}{5} i {1}{1}: 1min {2}: 2min
{3}: <3min>
65
TEL {3}{0}{5} i {2}
Remote code*1 {3}{0}{6}Default: 111 64
Ring count*1 IP {2}{1}{1} i {1}{2}-{7}: Rings
<4 rings>
{0}: Toll saver*2
64
TEL {2}{1}{1} i {2}
Erase all*1
(Erasing all messages)
{3}{2}{5}–61
Play all msg. (All
message playback)
{3}{2}{4}–60
Play new msg. (New
message playback)
{3}{2}{3}–60
Voice prompt*1
(Voice guidance
language)
{1}{1}{2}{1}: <English>
{2}: Français
27
GT15xxC.book Page 54 Tuesday, July 24, 2007 7:17 PM