Programming
For landline k
Feature | Feature code | Setting code | Page |
C.WTG options*1 | {2}{1}{5} | {1}: On {0}: <Off> | 44 |
(Call Waiting options) |
|
|
|
Set dial mode*1 | {1}{2}{0} | {1}: Pulse {2}: <Tone> | 27 |
Set flash time*1 | {1}{2}{1} | – | 56 |
Set line mode*1 *2 | {1}{2}{2} | {1}: A {2}: <B> | – |
Time adjustment*1 *3 | {2}{2}{6} | {1}: | – |
(Call Display subscribers |
| <Caller ID[auto]> |
|
only) |
| {2}: Manual |
|
VM tone detect*1 | {3}{3}{2} | {1}: <On> {0}: Off | 67 |
(Voice Mail tone detect) |
|
|
|
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 Generally, the line mode setting should not be adjusted. If Sis not displayed on the handset or the TEL indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to “A”.
*3 This feature allows the unit to automatically adjust the date and time setting when caller information from your landline service is received. To use this feature, set the date and time first.
For IP line l
Feature | Feature code | Setting code | Page |
DHCP*1 | {5}{0}{0} | {1}: <On> {0}: Off | 28 |
Import ringtone | {1}{7}{0} | – | 72 |
IP settings*1 | {5}{0}{1} | – | 29 |
joip message | {3}{6}{0} | – | 73 |
joip MSG alert | {3}{6}{1} | {1}: <On> {0}: Off | 74 |
(Amessage alert) |
|
|
|
joip service | {5}{3}{0} | – | 74 |
My joip numbers | {1}{0}{3} | – | 30 |
Software version*1 | {7}{2}{4} | – | 56 |
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
For product assistance, visit www.globarange.com | 53 |
For Aassistance, visit www.joip.com |
|
