Answering System
63
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Turning on the answering system remotely
If the answering system is off, you can
turn it on remotely by calling the selected
line in “Turning the answering system on
f”, page 58.
1Dial the phone number.
2Let the phone ring 15 times.
LThe unit answers your call with
the greeting message.
LYou can hang up, or if you call
from a touch tone phone, you can
enter your remote code and begin
remote operation (page 62).
Skipping the greeting message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message after
the beep.
Key Operation
{1}Repeat message
(during playback)*1
{2}Skip message (during
playback)
{4}Play new messages
{5}Play all messages
{9}Stop recording
Stop playback*2
{0}Turn answering
system off
{*}{4}Erase message
currently playing
{*}{5}Erase all messages
{#}{1}{7}Record a greeting
message for IP line
only.
{#}{2}{7}Record a greeting
message for landline
only.
{#}{0}{7}Record a common
greeting message for
both IP line and
landline.
{#}{1}{8}Turn answering
system on for IP line
only.
{#}{2}{8}Turn answering
system on for landline
only.
{#}{0}{8}Turn answering
system on for both IP
line and landline.
*1 If pressed within the first 5
seconds of a message, the
previous message is played.
*2 To resume operation, enter a
remote command within 15
seconds, or the voice guidance
starts.
GT15xxC.book Page 63 Tuesday, July 24, 2007 7:17 PM