Preparation
23
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Amber On LThe base unit’s IP address may conflict with the IP
addresses of other devices on your local network.
Check the base unit’s static IP address using the
handset: {MENU} i {#}{5}{0}{1}, then check
the IP addresses of the other devices on your local
network. If necessary, change the base unit’s
static IP address (page 29).
Flashing LThe base unit is obtaining an IP address or is
obtaining configurations from the A service.
Please wait.
LThe base unit is registering with the A service.
Please wait.
LIf the STATUS indicator continues flashing, check
the following:
– Check the base unit’s IP address using the
handset: {MENU} i {#}{5}{0}{1}
If necessary, change the base unit’s static IP
address (page 29).
– If an IP address was not acquired, check your
network devices’ (router, modem, etc.)
connections. If the connections are made
properly but the problem persists, check your
network devices’ (router, modem, etc.) settings.
– Many installation issues can be resolved by
resetting all the equipment. First, shut down
your modem, router, base unit, and computer.
Then turn the devices back on one at a time in
this order: modem, router, base unit, computer.
If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection issues in
your area.
– For m ore troubleshooting help, visit
www.joip.com or contact the A service
provider.
Flashing
rapidly
LUnplug the base unit’s AC adaptor to reset the
unit, then reconnect the AC adaptor. If the
STATUS indicator is still flashing rapidly, there
may be a problem with the base unit hardware.
Contact Panasonic service personnel.
Status Meaning
Colour Light pattern
GT15xxC.book Page 23 Tuesday, July 24, 2007 7:17 PM