Answering System
64
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Answering system settings

Remote code N

A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is 111.
1{MENU} i {#}{3}{0}{6}
2Enter the desired 3-digit remote
code.
3{SAVE} i {OFF}

Ring count N

You can change the number of times the
phone rings before the unit answers
calls. The default setting is 4 rings.
Toll saver*1: The unit answers on
the 2nd ring when new messages have
been recorded, and on the 4th ring when
there are no new messages. If you call
your phone from outside to listen to new
messages (page 62), you will know that
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1{MENU} i {#}{2}{1}{1}
2{V}/{^}: Select the desired line.
3{V}/{^}: Select the desired setting.
4{SAVE} i {OFF}
*1 l Depending on the condition of
your network connection, Toll
saver may not be used for the IP
line.
For Voice Mail service subscribers
k
If you subscribe to a flat-rate service
package that includes Call Display, Call
Waiting, Voice Mail, and unlimited
local/regional/long distance calls, please
see the following notes.
l
If you subscribe to Voice Mail service,
please see the following notes. For the
service details, visit www.joip.com or
contact the A service provider.
Note for k and l:
LTo use the Voice Mail service provided
by your landline service provider/A
rather than the unit’s answering
system, turn off the answering system
(page 58).
LTo use this unit’s answering system
rather than the Voice Mail service,
please contact your landline service
provider/A service provider to
deactivate your Voice Mail service.
If your service provider cannot do this:
– Set this unit’s Ring count
setting so that this unit’s answering
system answers calls before the
Voice Mail service does. It is
necessary to check the ring count
required to activate the Voice Mail
service before changing this
setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To
do so, consult your landline service
provider/A service provider.
GT15xxC.book Page 64 Tuesday, July 24, 2007 7:17 PM