Call Display Service
43
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Using Call Display service
This unit is Call Display compatible. To
use Call Display features, you must
subscribe to Call Display services
offered by your landline service provider
and the A service provider.
Note:
Lk Please contact your landline
service provider for details.
Ll Please visit www.joip.com or
contact the A service provider for
details.
Call Display features N
k
When an outside call is being received,
the calling party’s name and phone
number are displayed.
LGenerally caller information is
displayed from the 2nd ring.
l
When a call is received from a
Panasonic GLOBARANGE phone, the
calling party’s A number is displayed.
If the caller sets to show the name at
www.joip.com, it is displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
LIf the unit cannot receive caller
information, the following is displayed:
–“Private caller”: The caller
requested not to send caller
information.
–k “Unavailable Name &
No.”: The caller dialed from an
area which does not provide Call
Display service.
–k “Long distance”: The
caller called you long distance.
Lk If the unit is connected to a PBX
system, caller information may not be
received properly. Consult your PBX
supplier.
Missed calls N
If a call is not answered, the unit treats
the call as a missed call. “Missed
call” is displayed on the handset. This
lets you know if you should view the
caller list to see who called while you
were out. You can view the number of
missed calls by pressing {CID}.
Note:
LIf you press {CID}, then press {OFF}
without viewing all missed calls in the
caller list, “Missed call”
disappears from the display. When
you receive another new call, it is
displayed again.
Custom name display N
When the Call Display number is
received and it matches a phone number
stored in the phonebook, the stored
name from the phonebook is displayed
and logged in the caller list.

Ringer ID/Light-up ID N

These features can help you identify
who is calling by using different ringers
and ringer indicator colours for different
callers stored in the phonebook. You can
assign a different ringer and indicator
colour to each phonebook item. When a
call is received from a caller stored in the
phonebook, the assigned ringer rings
and the assigned ringer indicator colour
flashes after caller information is
displayed.
If you select “No Ringer ID” (default)
or “No Light-upID” (default), the
handset uses the ringer tone or ringer
indicator colour you selected (page 52,
GT15xxC.book Page 43 Tuesday, July 24, 2007 7:17 PM