Answering System
Remote operation
Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The unit’s voice guidance prompts you to press certain dial keys to perform different operations.
Important:
L In order to operate the answering system remotely, you must first set a remote code (page 64). This code must be entered each time you operate the answering system remotely.
L To call the unit via the IP line from a landline phone or cellular phone, you need an additional phone number you subscribed at www.joip.com other than the Anumber (page 4).
Using the answering system remotely
1Dial your phone number from a touch tone phone.
2After the greeting message starts, enter your remote code (page 64). L The unit plays back new
messages.
L The voice guidance informs you of the available commands. The announcements are different depending on the voice guidance language settings (page 27).
3Control the unit using remote commands (page 63).
4When finished, hang up.
Note:
L When you press a key, press firmly.
Voice guidance
During remote operation, the unit’s voice guidance starts and prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order:
–Play back all messages
–Play back new messages
–Record your message
–Erase all messages
–Record your greeting message
Note:
LIf you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call.
62For product assistance, visit www.globarange.com
For Aassistance, visit www.joip.com
