SAFETY PRECAUTIONS
Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.
These safety precautions are given for your safety. Re- view them carefully before operating the tool and before performing general maintenance or repairs.
Supervising personnel should develop additional pre- cautions relating to the specific work area and local safety regulations. If so, place the added precautions in the space provided in this manual.
The model HG60 Hydraulic Grinder will provide safe and dependable service if operated in accordance with the instructions given in this manual. Read and under- stand this manual and any stickers and tags attached to the grinder and hose before operation. Failure to do so could result in personal injury or equipment damage.
•The operator must start in a work area without by- standers. Flying debris can cause serious injury.
•Do not operate the tool unless thoroughly trained or under the supervision of an instructor. Establish a training program for all operators to ensure safe operation.
•Always wear safety equipment such as goggles, ear and head protection, and safety shoes at all times when operating the tool. Use gloves and aprons when necessary.
•The operator must be familiar with all prohibited work areas such as excessive slopes and danger- ous terrain conditions.
•Do not inspect, clean or replace the grinding wheel while the hydraulic power source is connected. Do not inspect or clean the tool while the hydraulic pow- er source is connected. Accidental engagement of the tool can cause serious injury.
•Always connect hoses to the tool hose couplers be- fore energizing the hydraulic power source. Be sure all hose connections are tight and are in good condi- tion.
•Do not operate the tool at oil temperatures above 140 °F/60 °C. Operation at higher temperatures can cause higher than normal temperatures at the tool which can result in operator discomfort.
•Do not operate a damaged, improperly adjusted, or incompletely assembled grinder.
•Never wear loose clothing that can get entangled in the working parts of the tool.
•Keep all parts of your body away from the rotating grinding stone. Long hair or loose clothing can be- come drawn into rotating components.
•Keep the wheel off all surfaces when starting the grinder.
•Do not use a grinding stone that is cracked, chipped or otherwise damaged. Always inspect stones for possible damage before installation or use.
•Always use stones that conform to the specifications given in the OPERATION section of this manual.
•Do not reverse grinding stone rotation direction by changing fluid flow direction.
•Do not move the tool until the stone has stopped rotating. Release the trigger if the power supply has been interrupted.
•To avoid personal injury or equipment damage, all tool repair, maintenance and service must only be performed by authorized and properly trained per- sonnel.
•If the material being ground creates an emission of dust and fumes, use personal protective devices.
•Never cock, jam or wedge the grinding stone during operation.
•Never cause sparks in the vicinity of flammable ma- terials.
•Eye injury, and cutting or severing of body parts is possible if proper procedures are not followed.
•Do not carry the tool by the hoses.
•Warning: Use of this tool on certain materials during demolition could generate dust potentially contain- ing a variety of hazardous substances such as as- bestos, silica or lead. Inhalation of dust containing these or other hazardous substances could result in serious injury, cancer or death. Protect yourself and those around you. Research and understand the materials you are cutting. Follow correct safety procedures and comply with all applicable national, state or provisional health and safety regulations relating to them, including, if appropriate arranging for the safe disposal of the materials by a qualified person.
HG60 User Manual ◄ 5
