Stanton C.313 Specifications, Factory Settings, Fader Start, Relay Play Using Two Players, Sleep

FACTORY SETTINGS

To return to factory settings…

• Power off the unit

• Press and hold the CLEAR button as you power up the unit

• The display will read clearALL, release the CLEAR button

WARNING: Restoring factory settings will delete cue point memory.

FADER START

By connecting the CD player to a mixing board that has the fader start fea- ture, the crossfader will engage playback or cue mode depending on its location. If the CD player is connected to the left side of the crossfader, playback will start once the fader is moved from the left most position towards the right. The CD player will re-cue itself when the crossfader is brought back to the left most position. Two CD players can be hooked up in this fashion to work on both sides of the crossfader.

RELAY PLAY USING TWO PLAYERS

When both CD players are connected to each other via their FADER START / RELAY jacks, the players can work in unison by playing tracks one after another from both units.

• Set both players to single play mode (the SINGLE indicator will be illu- minated in the LCD displays).

• Begin playback on the first player.

• When the first track ends, playback will automatically start on the sec- ond player and the first player will automatically enter standby mode.

• When the track on the second player ends, the first player will play the next track. The players will continue to perform continuous relay play until stopped or until the last track is played.

• You can set a cue point on the standby player to jump directly to that point.

SLEEP

The C.313 will automatically go into sleep mode after 15 minutes of inac- tivity. Press either the Play or Cue button to wake it up.

SPECIFICATIONS

1. APPLICATION Model C.313

2. POWER SOURCE

US: 120V, 60Hz, AC 15W

EU: 230V, 50Hz, AC 15W

JP: 100V, 50/60Hz, AC 15W

UK/AUS: 240V, 50Hz, AC 15W

3.	DIMENSIONS	318 (W)x 358 (D)x 109.5 (H) mm
4.	WEIGHT	4.3 Kgs

5. AUDIO CHARACTERISTICS
(1)	Frequency Response		20Hz to 20kHz	+0/-1.5 dB
(2)	Output Level		+6dBV
(3) THD+N			<0.015% @ 1kHz
(4)	S/N Ratio (ref: fullscale)		88dB
6. SEARCHING TIME (TEST DISC: TCD-792)
(1)	ITEM	TYPICAL	LIMITS	CONDITION
	Short access time	2sec	4sec	Play next track
(2)	Long access time	4sec	6sec	Track 1 ->Track 20
7. PLAYABILITY				Track 20 ->Track 1
		TYPICAL	LIMIT	CONDITION
(1)	ITEM
	Interruption	1mm	0.7mm	TCD-725
(2)	Black dot	1mm	0.6mm	TCD-725
(3)	Finger prints	75um	65um	TCD-725
(4)	Eccentricity	140um	140um	TCD-712 W/O TRACK JUMP
(5)	Vertical deviation	1mm	0.5mm	TCD-731R

9