DESCRIPTION OF FUNCTIONS
26.Master Output Pan: Pans the master output left to right.
27.Effects Master Return: Returns the wet signal from the outboard sound processor to the master output.
28.Master Output Level: Controls the overall output level of the mixer.
29.Level Meter Assign: Assigns the level meter to display the master output level (Master) or the
30.Level Meter: Displays the input or output levels of the mixer depending on the setting of the Level Meter Assign (29).
31.Power Switch: Turns the mixer on and off.
32.Unbalanced Master Output: RCA connectors for the master output. Connect to an audio receiver or mixer equipped with RCA inputs.
33.Booth output: RCA connectors for the booth output. This is just another output, although mostly used to monitor the audio in a DJ booth.
34.Record output: This output is used to record audio in order to set the master level without affecting the record level.
35.Master Trim: Attenuates the overall output of the mixer. This is useful in club situations to restrict the audio from clip- ping or overloading the sound system.
36.Ground posts: Connect to the ground post of turntable(s).
37.Channel inputs: Connect your turntables and/or CD players to any of the channel inputs.
• Which inputs do I use?
o Phono inputs are only used when connecting turntables.
o Line inputs are used with most common audio devices such as CD players, MP3 players, Samplers, etc. o Mic inputs are used to connect microphones.
