NAMES AND FUNCTIONS
4
5 
6
8 
7
4
5 
6
(4)REMOTE CONTROL CONNECTOR
Connect this connector to the control unit using the included control cord.
(5)DIGITAL OUT SOCKET
The
(6)AUDIO OUT L and R
The audio signals from each player are output from these jacks.
(7)POWER CORD
(8)VOLTAGE SELECTOR (For Dual Voltage model only)
Set this switch to the voltage for your location.
Control Unit
1
2
4 
5
TRACKM
7
REMAIN
CONTINU
S | F |
9
3 |
| 6 |
| 8 |
|
|
| 10 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| REMAIN |
|
|
|
|
|
|
|
|
|
|
| CONTINU |
|
|
|
|
|
TRACK | M | S |
| F |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11 14
15
17
19
20
|
|
|
|
|
|
|
|
|
|
| 21 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
12 | 13 | 16 | 18 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
(1)SHUTTLE (Shuttle Dial)
Use the dial to select the scanning direction and speed. The disc is scanned in the forward direction when the shuttle dial is turned clockwise from the neutral position, in the reverse direction when the shuttle dial in turned counterclockwise. There are 4 scan speeds. The further the wheel is turned, the faster the scan speed.
(2)OPEN/CLOSE 
(Open/Close Button)
Press it to open and close the disc holder. The main unit also includes OPEN/CLOSE buttons. The disc holder cannot be opened during playback, so stop playback before pressing the button.
(3)TIME (Time Button)
Press this button to switch the time between the elapsed time and remaining time and total remaining time of the disc.
(4)LCD
(5)SGL (Single Button)
Press it to switch the single and continuous play modes. The SINGLE mode is indicated by the SINGLE indicator on the LCD and continuous mode is indicated by the CONTINUE indicator on the LCD.
(6)PROG (Program Button)
Press the PROGRAM button, the player will enter the program mode and stop the CD playback.
(7)PROGRAM Indicator
The PROGRAM LED lights when program mode is set.
(8)RELOOP
If a seamless Loop has been made, but the CD Player is not actively in Seamless Loop mode, press the RELOOP button to reactivate the Seamless loop mode. RELOOP will appear in the LCD Display. To exit loop, press the OUT/EXIT button.
When the LOOP start point is set, the LED flashes. When in LOOP mode, both LEDs will light up.
(9)PITCH Indicator
When the indicator lights, the pitch adjustment is enabled.
4
