
ROTATING AND REPLACING THE OS2
ROTATING INSTRUCTIONS
1 . Remove the face plate.
2.Remove the 2 outer screws from the round OS2 plate (removing the 2 inner screws will detach the fader from the plate)
3.Rotate the plate to the desired posi - tion and tighten the screws back into the top and bottom holes.
REPLACING INSTRUCTIONS
1.Remove the the face plate.
2.Remove the 2 outer screws from the round plate (removing the 2 inner screws will detach the fader from the plate)
3.Remove the OS2 assembly and dis - connect the cable coming from the mixer.
4.Set the replacement fader assembly in the desired position and place the screws back in the top and bottom holes.
SA-12
D J C R A Z E S I G N A T U R E M I X E R
W A R R A N T Y
This unit has been designed and man - | Consequently, the parts listed above | ||
ufactured using | quality components. | are warranted to be free from defects in | |
Therefore, it is warranted to be free | materials and workmanship for a peri - | ||
from defects in materials (limited as | od of thirty days (30) days from the | ||
specified below), and workmanship for | original purchase date. | ||
a period of twelve (12) months from the |
| ||
original purchase date. During this | For the warranty to be valid, please | ||
period, all service and parts necessary | complete the warranty registration card | ||
to repair a defect will be free of charge. | attached or fill out the online registra - | ||
This limited warranty applies to | tion | ||
mechanical parts which are subject to | at www.stantonmagnetics.com | ||
wear and tear as specified: Faders, |
| ||
specified durability: 15,000 | cycles; | Mail completed warranty cards to: | |
Rotary potentiometers, specified dura - |
| ||
bility: 10,000 cycles; Switches, speci - | Stanton Magnetics, Inc, 3000 SW 42st | ||
fied durability: | 10,000 | cycles. | • Hollywood, FL 33312 |
OWNER’S MANUAL
STANTON MAGNETICS, INC
info@stantonmagnetics.com • (954)
© 2001, Stanton Magnetics, LLC