DESCRIPTION OF FUNCTIONS
| 15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
1 |
|
|
|
| 16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 14 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
2 |
|
|
| 17 |
|
|
|
|
| 17 |
|
|
| 17 |
|
|
|
|
|
| 13 | ||||
|
|
|
|
|
| ||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 12 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 11 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
5
9
7 |
| 7 |
|
68
DESCRIPTION OF FUNCTIONS
1.Microphone 1 input - This combo (1/4”/XLR) connector is used to connect a microphone. The volume is controlled by the MIC 1 knob.
2.Mic 1 level - Controls the input level of Microphone input 1.
3.Mic equalizer - Individual controls for high frequency, midrange, and low frequency equalization. The EQ controls both Microphone inputs. Note: Any changes made to EQ settings will change the overall
output level.
4.Pre fader listen - Selects the channel(s) - 1, 2, or 3 - to be previewed in the headphones.
5.Channel faders - Controls the output volume of each channel. The signal is routed to the line faders after the gain, EQ, pan, and effects.
6.Crossfader - The crossfader is used to cross fade between channels 1 and 3.
7.Kill switches - Kill switches are used to completely eliminate Hi, Mid, or Low frequencies from the audio. This is used for tricks
during a mix.
8.Headphone outputs - This is the headphone output jack to connect your headphones.
9.Cue pan - Fades the headphone output between the PFL signal (selected by the Cue Select buttons) and master output, effectively allowing the user to preview a mix.
10.Cue level - Controls the volume of the headphone output.
11.Booth level - Controls the booth output level. This is basically a 2nd output. It is usually used for monitoring in a DJ booth, but can be used for various applications.
12.Master output Pan- This is the pan or balance control for the mast output.
13.Master output level - Controls the overall output level of the mixer.
14.Output meters - These LEDs let you know if the audio coming out of the mixer is loud enough (or too loud!). If the LEDs reach the red, the mixer is probably clipping, or distorting.
15.Input selectors - These toggle switches select the input source between phono and line for each channel.
16.Input gains - Controls the input sensitivity level of each channel. An LED meter is provided on each of the 3 channels for proper
adjustment of the levels.
17.Channel equalizer - Individual controls for high frequency, midrange, and low frequency equalization with +9dB/Kill
adjustments. Note: Any changes made to EQ settings will change the overall output level.
