Stanton STR8-90 manual Scratch Protection Specifications, Warranty

SCRATCH PROTECTION SPECIFICATIONS

The STR8-90 includes a pair of rubber protectors. These were designed to protect the turntable’s rounded aluminum edges from the mixer while scratching. When the turntables are placed sideways, the round edges of the turntable may come in contact with the mixer’s rack ears causing damage

to the turntable body. Placing the rubber protectors on the mixer rack ears (see picture) will prevent the turntable from getting scratched.

WARRANTY

This unit has been designed and manufactured using quality components. Therefore, it is warranted to be free from defects in materials (limited as specified below), and workmanship for a period of twelve (12) months from the original purchase date. During this period, all service and parts necessary to repair a defect will be free of charge. This limited warranty applies to mechanical parts which are subject to wear and tear as specified: Faders, specified durability: 50,000 cycles; 10,000 cycles; Switches, specified durability: 10,000 cycles. Consequently, the parts listed above are warranted to be free from defects in materials and workmanship for a period of thirty days (30) days from the original purchase date.

Note: For the warranty to be valid, please complete the online warranty registration form found at www.stantonmagnetics.com.

Stanton Magnetics, INC. 3000 SW 42nd Street x Hollywood, FL 33312 Tel: (954) 689-8833 Fax: (954) 689-8460

Email: info@stantonmagnetics.com

TURNTABLE SECTION

Starting Torque:	More than 2.2kgf.com
Motor:	16pole, 3phase, brushless DC motor
Platter:	330mm dia. Aluminum diecast
Pitch:	+/-8%,+/-16%,+/-25%
Brake:	Electronic brake
TONE ARM SECTION
Tone arm type	Static balanced straight
	tonearm with Cardan suspension
Effective Arm Length	191mm
Tracking Force Adjust Range	0-4g
Applicable Cartridge Weight	6-10g
Frequency Response	20 - 20 kHz
Channel Separation	More than 15 dB
Channel Balance	Within 2.5dB at 1 KHz
Wow & Flutter:	Less than 0.20% WRMS
	(JIS WTD) with 33 1/3rpm
S/N ratio:	More than 50dB (DIN-B)
Needle Pressure range	1.5-2g
GENERAL SPECIFICATIONS
Dimensions:	450(W) x 370 (D) x 140 (H)mm
	17-3/4" x 14-5/8" x 5.5" (WxDxH)
Weight:	9.9Kg (21.8 lbs.)
Power supply:	AC 100V, 50/60Hz
Power consumption:	12W