PART NAMES AND FUNCTIONS
20)EXTRA STYLUS HOLDER Place extra headshells here.
21 | 22 | 23 | 24 |
21)PHONO/LINE OUTPUT L & R
This is the standard analog output (RCA jacks) which can be connected either to a phono or line input on any DJ mixer, depending on the setting of the phono / line selector.
22)PHONO/LINE SWITCH
23)POWER CORD CONNECTOR
Used to connect the included power cord.
24)POWER SWITCH
This switch turns the power on or off, including the motor and audio signal.
SPECIFICATIONS
APPLICATION:
This specification applies to the direct drive turntable unit T.120
STANDARD TEST CONDITION: |
|
Ambient Temperature | 20 +/- 2 degC |
Relative Humidity | 65% +/- 5% |
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
TURNTABLE SECTION: |
|
Type | |
Motor | 16pole, 3phase,brushless DC motor |
Speeds | 331/3 and 45rpm and 78rpm |
Wow and Flutter | Less than 0.1% WRMS (JIS WTD) with 331/3rpm |
Pitch Controls | +/- 8%, |
Starting Torque | More than 4.5kgf.cm |
Starting Time | 0.2~6 sec.(Adjustable) |
Braking Time | 0.2~6 sec.(Adjustable) |
Braking System | Electronic brake |
Pitch Bend | |
Time for Speed Change | Less than 0.2 sec. from 331/3 to 45 rpm. |
| Less than 0.2 sec. from 45 to 331/3 rpm. |
| Less than 0.5 sec. from 331/3 to 78 rpm |
Audio Output | Phono/Line output |
