ASSEMBLY
Thank you for purchasing the T.55 USB turntable from Stanton. The T.55 USB is built upon Stanton’s heritage of designing audiophile products for the most discriminating listener. Before assembling the T.55 USB please check to make sure the following items are included with the main unit in the carton.
AC cord | Slipmat | |
RCA cable | Stanton 500.V3 Cartridge | |
45 rpm adaptor | except on model T.55USBX, no cartridge included | |
Counter weight | Cakewalk Pyro Audio Creator LE | |
Cloth dust cover | User Manual | |
Platter with belt (Belt is located underneath the platter) | Target light |
After confirming that all of the above parts are included in the box, its time to assemble the turntable.
1)Remove the platter from its protective wrapping and place on the spindle of the main unit.
2)Loop the belt over the motor pulley. Be sure it does not twist.
Ribbon tape
Driving roller
Drive belt
3)Remove the slipmat from its protective wrapping and place on the platter.
4)Place the
5)If desired, place the 45rpm adaptor in its allocated holder on the main unit.
PLACEMENT
-Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance.
-Do not place the unit in a location where there is high humidity or a lot of dust.
-Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor or through the air resulting in feedback. Find a location which is very stable and vibration free.
-The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.
CONNECTIONS
Before connecting the unit it is advised that you also consult your current equipment instruction manual.
Note: Be sure to turn off the equipment before you make changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your amplifier.
Output terminals |
| Amplifier(Receiver) | ||
L (White) |
|
|
| L Channel |
|
| |||
|
| |||
R (Red) |
|
|
| R Channel |
|
| |||
|
|
You can also use a line input by setting the phono / line switch at the rear of the turntable to line.
3. Connect a PC via USB cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set the PH/LINE |
|
|
|
|
|
|
| ||||
switch to “PH” | Set the PH/LINE | ||||||||||
|
|
|
|
| |||||||
|
|
|
|
| switch to Line” |