l paper-A package of 16 - 20 lb (60 -1 35g/m2) photocopier paper is best
to start with; however, the printercanuse thickerpaper, as well as special
media, such as envelopes, mailing labels, and transparent sheets.
l someone to help you lift the printer from the carton to its new
location.
UNPACKING The shipping carton contains two layers of material. On top is a Styrofoam
tray containing the paper cassette, power cord, ground wire, and the users’
manuals.
Printer Power cord
Remove the tray with its contents and set it aside-NOT on the table where
the printer will go. On the bottom, you will see the printer in a plastic bag,
resting in its own Styrofoam nest.
Summon your lifting partner and prepare to remove the printer. Since it is
tightly cradled in the shipping carton, it may be necessary to tip the carton
slightly to get a firm grip. Lifting handles are located half-way back on each
underside of the printer, but they will be difficult to use, because of the
plastic bag. Lift the printer from the Styrofoam and place it on the table or
stand, plastic bag and all. Now slide the bag off by slightly lifting the printer
gently.
To stabilize the printer during shipment, it contains several kinds of
protective material. The front of the printer has three slots, one about 9 in.
-
-
8