CHANGING CHARACTER SET If you want to use a character set other than that provided at the factory,
follow this procedure:
l After going off line and pressing [PROGRAM]
l Press [NEXT] until you see
CHARACTER
l Press [ENTER], which displays
FONT
(preceded by primary or secondary, if the printer is in the HP LaserJet
III emulation)
l Press [ENTER], which gives
CHARACTER or SYMBOL SET
depending on the emulation.
l Pressing [ENTER] again presents the various options.
9 Press [NEXT] until you see the desired one.
l Then press [ENTER].
l Press [ON LINE].
CHANGING FONT ATTRIBUTES Attributes are those characteristics of a type font that make it distinct from
all others. These include spacing of characters, either proportional or
monospaced (uniform); pitch, measured in characters per inch; height or
point size; style, either upright (roman) or italic; stroke weight, bold,
medium, or light; and typeface. Typefaces available with the Star
LaserPrinter 8111 include Courier, Helvet, Tms Romn, Gothic, Script,
Prestige, Caslon, Orator, Line printer, Pica, and Elite. All these attributes
can be selected from the front panel with the printer in Program Mode.
58