Star Micronics Dot Impact Printer 3-3-9 Logo ESC FS q n [x11 x12 y11 y12 d1dk]1[xn1 xn2 yn1 yn2 d1dk] n

STARCommandSpecications

Rev. 0.70

3-3-9 LogoESC FS q n [x11 x12 y11 y12 d1…dk]1…[xn1 xn2 yn1 yn2 d1…dk] n

[Name] Register logo

[Code] ASCII ESC FS q n [x11 x12 y11 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n

Hexadecimal 1B 1C 71 n [x11 x12 y11 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n

Decimal 27 28 113 n [x11 x12 y11 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n

[DenedArea] 1≤ n ≤ 255

0 ≤ xn1 ≤ 255, 0 ≤ xn2 ≤ 3

1 ≤ (xn1 + xn2 x 256) ≤ 1023

0 ≤ yn1 ≤ 255, 0 ≤ yn2 ≤ 1

1 ≤ (yn1 + yn2 x 256) ≤ 288

0 ≤ d ≤ 255

k = {(xn1 + xn2 x 256) x (yn1 + yn2 x 256) x 8}

[Initial Value] ---

[Function] Parameter details

 •n:   Speciesregisteredlogocount

• xn1, xn2: Horizontal size of registered logo {(xn1 + xn2 x 256) x 8} dots

• yn1, yn2: Vertical size of registered logo {(yn1 + yn2 x 256) x 8} dots

• d: Registered logo data

• k: Logo data count

 •Thiscommandshouldbespeciedatthetopoftheline.

 Ifthereisunprinteddatainthelinebuffer,thiscommandisexecutedafterprintingthatdataatthepointupto

where ESC FS q is procssed.

 •Whentherstparameterisdeterminedtobefreeoferror,theprinterstartsprocessingthiscommand.

 •Whenlogoregisterprocessingstarts,allpreviouslydeneddataisdeleted.

 (Itisnotpossibletoreregisteraportionofapluralityofdenedlogodata.)

 •Logoregistrationnumbersaredenedinrisingorderfrom1.

•Ifthedenedareaspeciedbytheparameterisnotempty,orifthereisanerrorintheparameter

specication,registerprocessingisexited.(Thepre-registeredandcompletedataiseffective.)

 •Theprintershouldberesetiflogoregistrationiscompletedorregisterprocessingisaborted.

 •Ifanerroroccurswhileperformingregisterprocessing(thetimefromwhentherstparameterisOKuntil

the printer initialization is completed after registering a logo), error processing, mechanical operation and

statusprocessingcannotbeperformed.Also,datamustnotbesentfromthehostduringthattime.

• This command is executed only for logo registration and does not accompany the printing operation. Logos

are printed using the ESC FS p (print NV logo) command.

 •TheNVmemorycapacityis2Mbits(256Kbytes=262,144bytes).However,4Kbytes(4,096bytes)are

kept as parameter information separate to the data so the data region memory capacity is 258,048 Bytes.

 Ex.: Whentheregistereddatasizepereachoneis6Kbytes(6,144bytes),itispossibletoregister

258,048/6144 = 42.