Star Micronics DP8340 user manual Data Trans - Mission

If the position into which the download character is written (the character code) is defined as (21)H, (22)H, (23)H, then we have n1 = (21)H, n2 = (23)H The relation between the character pattern data and the print head assigns the 9 pin as unused. Therefore, m0 = (80)H.

If data m1 to m18 is converted to hexadecimal, it appears as follows.

Data	Binary	Hex.	Data	Binary	Hex.	Data	Binary	Hex.
m1	10100000	A0	m1	10011000	98	m1	11111111	FF
m2	10100000	A0	m2	11100100	E4	m2	10000011	83
m3	10111110	BE	m3	10000010	82	m3	10111101	BD
m4	10100000	A0	m4	11100100	E4	m4	11000001	C1
m5	10100000	A0	m5	10011000	98	m5	11111111	FF

DATA TRANS - MISSION

PRINT SAMPLE

CODE

FUNCTION

OUTLINE

CODE

FUNCTION

OUTLINE

(1)	Difine download	(1B)H (26)H (00)H (21)H (23)H (80)H
		(A0)H (A0)H (BE)H (A0)H (A0)H
		(80)H (98)H (E4)H (82)H (E4)H (98)H
		(80)H (FF)H (83)H (BD)H (C1)H
		(FF)H
(2)	Select download	(1B)H (25)H (01)H
(3)	Character code	(21)H (22)H (23)H (A0)H
(4)	Cancel download	(1B)H (25)H (00)H
(5)	Character code	(21)H (22)H (23)H (0A)H

ESC a n

(1B)H (61)H n

n-line feed

After printing the data in the current line, n lines are fed by this code. The value of n ranges from 1 to 120.

ESC C n (1B)H (43)H n

Sets page length in lines

This code sets the length of a page to n lines. The value of n ranges from 1 to 120. On initialization, the page length default condition will be 42 lines. The line feed pitch is one- sixth inch.

– 17 –