Manuals / Brands / Computer Equipment / Printer / Star Micronics / Computer Equipment / Printer

Star Micronics SCP700 Series , Optional serial interface pins and signal names

1 108

Download 108 pages, 1.69 Mb

Optional serial interface pins and signal names

No. Signal

Name Direction Function

1 FG — Frame Ground

2 TXD OUT Transmission data

3 RXD IN Receive data

4 RTS OUT Data terminal ready signal. This signal changes to SPACE when the printer is ready to

receive data.

6 DSR IN Signal line that indicates if the host computer can receive data.

SPACE: host can receive

MARK: host cannot receive

The status of this signal is not conﬁrmed.

This signal can be speciﬁed as an internal reset signal using of DIP Switch 7 (page 21).

MARK of 1ms or longer activates the reset.

7 SG — Signal ground

20 DTR OUT Same as RTS (Pin 4).

25 INIT IN This signal can be speciﬁed as an internal reset signal using of DIP Switch 8 (page 21).

SPACE of 1ms or longer activates the reset.

Contents

Main Page TABLE OF CONTENTS Page Chapter 1: Outline Chapter 2: DIP Switch Settings Page Page Page Chapter 3: Memory Switch Settings Chapter 4: Control Panel Operations Indicator lights Buttons Producing a test print Adjusting the slip printers dot alignment SLIP/RESUME RECEIPT Hexadecimal dump Errors Page Chapter 5: Standard Serial Interface Standard serial interface pins and signal names 15 Interface connections Data protocol Page Page Page Page Chapter 6: Optional Interface Optional serial interface Optional serial interface pins and signal names 23 Interface connections Data protocol Optional parallel interface Optional parallel interface pins and signal names Page Chapter 7: Peripheral Unit Driver Circuit Modular plug Drive circuit Chapter 8: Automatic Cutter Chapter 9: Control Codes Page 32 Page Formatting Print Position Control 33 Dot Graphics Printing Download Graphics Printing Peripheral Device Control 34 Auto Cutter Control Slip Printer Control Customer Display Commands (Combo mode only) Page Mode 35 Other Commands Page Page Page Page 40 3) 2-character codes Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 60 Sample EXAMPLE Printin g Page Page Page FUNCTION EXAMPLE Printing possible Printing not possible Page Page Page Page Page Page Page Page Page Page Page Page Page 78 3) N=2n3 :Always 0 (Default) 4) N=3 (Star mode only) n1 :Always 0 5) N=4 (Star mode) n2 :Always 0 n3 :Always 0 n4 :Always 0 Page Page Page Page Chapter 10: ESC/POS Mode TM-T85 mode Page TM-295 mode TM-295 mode emulation cautionary items